天瑞克拉夫特 ‖ vl700a 机型介绍 -澳门电玩

发布时间:2016-12-05

vl700a技术特点

vl700a machine technical characteristic

铸件全部经过多次研究及软件分析强化,并经三次时效处理(二次热时效一次振动时效),高品质铸件极其卓越的刚性,保障了机床的卓越精度和持久的稳定性;

all cast parts have gone through multiple software analysis, and a stress ageing treatment to release residual stress (two thermal and one vibration ageing treatment), the great rigidity from the casting part ensures the machine’s good accuracy and stableness.


 

11/15kw主轴伺服电机功率和扭力同规格机器中最大,彰显机台切削刚性;

the 11/15kw spindle electric servo motor has better power and torque compare to similar product from other brands. it provides great cutting rigidity.

 


主轴配有浮动反扣松刀装置,减少主轴冲击,确保最佳精度持久;

the spindle equipped with the unclamping cylinder, decrease shocks and impacts act on the spindle, ensure the accuracy as long as possible.


肩扛式刀库专利设计结构,变形小换刀速度快,全封闭的刀库罩防止铁屑飞入刀套影响刀具安装。

shoulder carrying type atc with small deformation and short tool change time. fully closed tool magazine cover protect the atc system from metal chips damage.


z轴采用超大马力电机驱动,消除机械平衡及电流值过大的缺陷,可明显提高三轴的快速响应速度和换向时循圆精度;

the z axis use a extra powerful electric motor, eliminate the balance weight and extra electric current, it can increase the reaction speed of all three axes and accuracy when change direction.


三轴均采用高刚性p级滚珠导轨,承载大、磨损小、精度高,并能承受横截面上任一方向的负荷;

all axes use high rigidity p grade ball type guide way. this type of linear guide way has good heavy loading performance, low wear, high accuracy also can bear load from every direction as long as it acts on the cross section.


 

机床配有全封闭防护罩,并按人类工效学设计,安全、美观,操作舒适宜人;

the machine was fully covered by the protection shield. the protection shield was designed according to human body geometry, safe, visually pleasing and easy to operate.


日本showa和smc整套润滑气动元件集中于机床左后侧,方便观察及维护;

the lubrication and pneumatic system are from japanese brand showa and smc. those two systems were located at the left hand side, back of the machine, easy for observation and maintenance.


配置链板式排屑机,清除切屑安全又高效。在出屑口处安装有ce防护罩,并装有急停按钮,保护操作者的安全。

the machine equipped with chain chip conveyor, clean chips efficiently and safely. there is a ce protection shield at the chip exit point with emergency button, protect the operator from danger.


宁波天瑞精工机械有限公司

ningbo sky master precision machinery co.,ltd.

地址:浙江省余姚市谭家岭东路168号

add:no.168 tanjialing east road yuyao,zhejiang,china

总机:0574-6276 6276/6276 6789

传真:0574-6276 6701

邮箱:[email protected]

网址:www.skymaster.com.cn

返回